Gallery

Options

First aid unit without lifeguard tower

Dupi prefabricats


Sizes:
Its sizes, limited by its functionality in transport,
can be:
3.00 x 2.45 x 2.45 m. (height)
4.00 x 2.45 x 2.45 m. (height)
5.00 x 2.45 x 2.45 m. (height)
5.50 x 2.45 x 2.45 m. (height)
Two or more units also can be attached to get
more surface.

Weight:
It allows to be handled easily with a low tonnage
crane, what makes it easy to hibernate.
1.500 kg
1.800 kg
2.000 kg
2.200 kg

Materials:
Structure, can be sight, made of treated wood with risk class number 4, made of planks of 70 mm thick, or it can be covered with wersalite and AISI 316 stainless steel.
Outside walls, can be made of pressure-treated wood with class risk certification 4, with tongue and groove joint of 130 x 22 mm width, with an exterior finish with UV protect varnish, or made of wersalite, it is a material made of resins which is very resistant, this material supports solar rays without losing its color and is totally waterproof, does not become deformed being maintenance free. Due to the fact that it is a material with little porosity, the cleaning in case of graffiti is much simpler than in wood. Available in colors, imitationwood, cream and white.
Inside walls, are made of trespa, this material is completely smooth, without pores, painted in white color with a permanent painting, what is ideal for public toilets, very hygienic, high density, very hard and strong and totally waterproof, what allows the use of abundant water and in pressure in periodical disinfection. The walls are 4 mm. thick and its weight is 8.4 kg/sq.m. It resists the impact value 4 of the EN 438-2 (11) index, water absorption 0%, thermal temperature -40º + 130º C. Reaction to fire according to UNE 23727/90 regulation.
All its metallic components such us hinges, fixations and nuts and bolts are made of AISI 316 stainless steel, completely necessary in marine environments.

Floor made of synthetic parquet.
Roof with thermal isolation in sandwich kind 60 mm thick (10+40+10), 10 mm wood, 40 mm high density "porexpan" and 10 mm tongue and groove in varnishing wood. The roof is in lacquered plate in only one slope in the 2.50 m part and its interior light sizes are 2.65 m the highest part and 2.45 m the lowest part.
Electrical supply and plumbing completely recessed to avoid any act of vandalism, according to current regulations. Lightning is made with against-vandalism luminaries with a minimum of 150 lux.

Accessories:
Inside the first aid unit may be added a small toilet for private use of the staff, which can be equipped with toilet bowl, sink and shower.
All the accessories inside are made of stainless steel with round edges to avoid any damage to the users. Except for the toilet bowl, which may be made of ceramic or stainless steel.
Optionally clinical equipment for the smooth running of the unit can be included.

Installation:
For proper installation it is only needed a flat, minimally hard surface or only support points with a size of 25 x 25 x 15 cm, leveled between them.
Installation and transport are easy and quick.

Guarantee:
5 years guarantee against manufacture defects or rottenness. 


Your form did not fulfill all the following criterias: All mandatory fields (marked with asterisks) must be filled, and the field contents must be valid.
You must fill out all mandatory fields (marked with asterisks).
Your email address is invalid.
An attachment has a wrong file type.
  • Name*
  • Phone*
  • Email*
  • Message
  • I HAVE READ AND ACCEPT THE TERMS OF USE AND THE PRIVACY POLICY *
  • *
  • * mandatory