Bird watching unit

Its sizes, limited by its functionality in transport, can be:

3.00 x 2.45 x 2.45 m. (height)

4.00 x 2.45 x 2.45 m. (height)

5.00 x 2.45 x 2.45 m. (height)

5.50 x 2.45 x 2.45 m. (height)

Two or more units also can be attached to get more surface.

It allows to be handled easily with a low tonnage crane, what makes it easy to hibernate.

1.500 kg

1.800 kg

2.000 kg

2.200 kg

Structure, can be sight, made of treated wood with risk class number 4, made of planks of 70 mm thick, or it can be covered with wersalite and AISI 316 stainless steel.

Outside walls, can be made of pressure-treated wood with class risk certification 4, with tongue and groove joint of 130 x 22 mm width, with an exterior finish with UV protect varnish, or made of wersalite, it is a material made of resins which is very resistant, this material supports solar rays without losing its color and is totally waterproof, does not become deformed being maintenance free. Due to the fact that it is a material with little porosity, the cleaning in case of graffiti is much simpler than in wood. Available in colors, imitationwood, cream and white.

Inside walls, made of melamine panels, between the inside and outside covering there is a 30 mm thick thermal isolation with polystyrene.

All its metallic components such us hinges, fixations and nuts and bolts are made of AISI 316 stainless steel, completely necessary in marine environments.

Floor made of wood.

Roof with thermal isolation in sandwich kind 60 mm thick (10+40+10), 10 mm wood, 40 mm high density "porexpan" and 10 mm tongue and groove in varnishing wood. The roof can be gable roof or in lacquered plate in only one slope in the 2.50 m part and its interior light sizes are 2.65 m the highest part and 2.45 m the lowest part.

Door and outside windows, it has a door of 2 x 0.80 m and the necessary windows according to the design to watch birds.

Inside the unit some wooden counter can be installed for the comfort of users, to stand to make a good observation or to make photographs comfortably.

For proper installation it is only needed a flat, minimally hard surface or only support points with a size of 25 x 25 x 15 cm, leveled between them.

Installation and transport are easy and quick.

5 years guarantee against manufacture defects or rottenness.